Home / All / Radiator DOUBLE MAX

Radiator DOUBLE MAX

COD N-L236
measure (mm): 290 x 430 x 35
weight: 2.560 kg

The double-pass configuration, combined with the newly designed MAX radiator core, which allows for an increased flow of water and, therefore, an increased heat exchange, are the main features of the DOUBLE MAX radiator.

Product Description

The double-pass configuration, combined with the newly designed MAX radiator core, which allows for an increased flow of water and, therefore, an increased heat exchange, are the main features of the DOUBLE MAX radiator. The fins are also new, arranged according to a new layout with respect to the standard core. The inlet of the top tank has been redesigned to direct the water homogeneously across the radiator, allowing optimal use of all the surface area available. Both the inlet of the top tank and the outlet of the bottom tank benefit from a new curved shape.
From the outside, the presented cross-section of the DOUBLE MAX is identical to that of the BIG MAX: 29 cm in width by 43 cm in height. The main difference compared to the more traditional BIG MAX lies in the revolutionary double-pass configuration. Basically, the DOUBLE MAX radiator is divided into two sections, thanks to a baffle welded inside both the top and bottom tanks: this way, the water, flowing in from the top, goes through only the most inner half of the radiator core (the one closest to the driver). From there, it flows down through the first half of the tuubes for a first temperature drop. Once at the bottom, the water is redirected upwards to the second half of the top tank through an external welded aluminium tube only to flow across the most external portion of the radiator core for a second cooling cycle. The coolant, eventually, is pushed towards the engine by the work of the water pump.
The internal configuration of the radiator, split into two sections, made it necessary to fit it with a pressure-relief hole, located in the upper left part when looking at the radiator from the front, for an easier venting. A further optimization of air flows is guaranteed by installation of a rear deflector as standard, which is able to deflect hot air from the rear tire and favor its outflow from the rear the radiator. In case of extreme weather conditions, the Double MAX radiator can be used together with the Supplementary model.

When to use:

icona primavera Spring (except OK)

Summer

You may also like…

Made of aluminium and machined from solid, Big radiator supports have an overall width of 29 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L157
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium. It differs from the R version thanks to the toothed pulley, which is specific to frames with a toothed belt (HTD) instead of O-Rings.

COD N-L205
weight: 5 g

COD N-L135
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium.

COD N-L128
weight: 7 g

COD N-L129 BLU
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L129 VERDE
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

Made of aluminium and machined from solid, Big radiator supports have an overall width of 29 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L115 ROSSO
weight: 0.380 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L133
weight: 40 g

A specific part for housing the water temperature probe (of any brand, thanks to its standard thread), it features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.

COD N-L125 GIALLO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L101
weight: 0.630 kg

New-Line’s Supplementary model is mounted as an additional radiator to the main one (e.g.: R MAX, RS MAX, Big MAX, etc.). It serves to increase the overall effectiveness of engine cooling process in extreme climatic conditions.

COD N-L129 NERO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L115 NERO
weight: 0.380 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L129 ARANCIO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L118
weight: 0.350 kg

Specific for summer use, the plexiglass air shield has a dual function. When closed, it helps the engine to reach its operating temperature, while when open it acts as a conveyor.

COD N-L126 GIALLO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L115 BLU
weight: 0.380 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L129 GIALLO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L126 VERDE
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L125 ROSSO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L126 ROSSO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

Made of aluminium and machined from solid, Big radiator supports have an overall width of 29 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L211 NERO
weight: 0.220 kg

COD N-L126 BLU
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L211 ROSSO
weight: 0.220 kg

Made of aluminium and machined from solid, Big radiator supports have an overall width of 29 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

Made of aluminium and machined from solid, Big radiator supports have an overall width of 29 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L129 ROSSO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L125 NATURALE
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L134
weight: 26 g

A specific part used when joining two silicone tubes. It features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.

COD N-L211 BLU
weight: 0.220 kg

COD N-L138
measure (mm): 1,000
weight: 10 g

misure: 1,000

Can also be installed with the axle already mounted because they are heat-weldable.

COD N-L125 BLU
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L125 ARANCIO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L125 NERO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

Made of aluminium and machined from solid, Big radiator supports have an overall width of 29 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L126 NERO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.